School of Restoration: Teal & Persimmon side table

Good morning class and welcome to the School of Restoration! As many of you know, I guest blog over at The Divine Minimalist in a tutorial section they call School of Restoration.  Head on over to their blog and take a look around! So first up in what's to be a long line of tutorials, is the Teal & Persimmon Side Table.

Well hello there my sweet lil side table! Or sweet now... because before this simple yet satisfying make-over, this table would have quickly been put in the back of the basement.  Distressing is a popular and fun way to give furniture a fresh look, while giving the impression that your grandma made it this way decades ago  (and how thoughtful of her, it happens to match your home decor!). Today we'll walk through the steps for this two color distressed effect, and some of the tricks that I've picked up along the way.

Materials:

• Electric Sander with medium to fine sanding pads.  (or sandpaper and a sanding block if you don't have a sander)
• Medium Steel Wool
• Sanding Sponge - fine to medium (optional)
• White Candle (a dead tealight is perfect)
• 2 colors of paint - one for the undercoat, one for the topcoat.
• paintbrush
• plastic sandwich bags
• Watco Satin Wax (or your preferred seal)
• Plastic gloves (I know, I don't like them either, but just do it!) 

Let's begin.  Before you go starting on a piece, check to be sure it's sturdy, solid wood, and doesn't smell like mold.  If you do have a mold problem, a bleach and water solution plus plenty of time in the sun should clear that up.  My biggest pet peeve with furniture, is particle board. If you see it, run away.  It's not worth your time to try to repair particle board.  It's flimsy, absorbs moisture, and crumbles under pressure. Just say no! Here's my table:

 Look at these water stains, the previous owner was clearly an anti-coaster household.  We can fix that!

First we want to rough this table up so we can ditch some of those water stains, and give our new paint something to grab onto.   I'm using my orbital sander, with velcro sanding pads.  If you don't have an orbital sander you can of course sand by hand, but if you are considering re-doing furniture regularly it's worth the investment.  You can pick up a good one for around $20-30.  Pop your dust mask on (safety first!) and sand it smooth.

Once your table is sanded, clean off any dust and choose your undercoat.  I'm not priming this table because I want the wood to show through in my final product.  For my undercoat color, I'm using Martha Stewart's Persimmon Red.  I love when paint companies name their products after foods! I got this at Home Depot, and the sample size sitting at $3-4 a bottle will be more than enough.

I forgot to mention that her brand of paint samples has a built in brush in the cap, how clever is that?  Next up, I painted patches on the table where I will want the persimmon to show through.  Prime real estate for these are edges, handles, and I like to choose a few surface areas too.  This will give it the look of once being entirely persimmon.

Ah yes, wax! This is a great tip.  When you are distressing from one color and trying to retain the color underneath, it's really tricky to not over distress both colors right off the table.  Unless you wax. Take an old white candle, and rub wax all over the areas you painted your undercoat.  The wax is going to act as a block against our next coat of paint.

For my top coat, I'm using some "oops paint" by Dutch Boy.  If you haven't heard of oops paint, ask your hardware store - they almost always have an area where paints they either mixed incorrectly or customers didn't want are sold for cheap. We're talking $1-2 here folks. I've made a habit of browsing that aisle every-time I'm there, just in case..and I have racks of paint to prove it!  Luckily I found a teal, and it's a dirt fighter too - so fancy...

 Here's a closer look at the color:

For a larger piece you may want to break out your paint roller to save time.  This table is relatively small, so I hand painted.  A great tip in-between coats: put your paint brush in a plastic sandwich bag - this keeps the paint moist so you can re-use it without cleaning the brush each time. 

 Let's start the distressing!  A medium grade steel wool is ideal for this next step.  Gently rub all the areas you previously waxed until you start to see some of that undercoat show through. Try to think of areas that would receive more wear and tear for heavier distress: corners, handles, and feet tend to see a lot of traffic. A medium to fine sanding sponge is also a valuable tool.  Rub the corners and edges with your sponge to let the color and wood show through, you'll see the sponge gets that paint to slip right off!  Depending on your personal preference of how much distressing you like, you can take it one step further and bang the piece up with chains, screwdrivers, anything you have lying around.  I once beat the side of a table with an old saw blade - what a kodak moment!

 Here's a close up of the distressed front. You can see I have the red & some of the wood showing.

 Step back, take a look, and pat yourself on the back. Now it's time to choose a seal, if you want to give the table some protection.  I've found all the Minwax Polycrylics to be excellent clear top coats that range from satin to gloss - and I promise I wasn't paid to say that! They just never fail me. Though  for this table I chose Watco Satin Wax, natural color.

The wax provides a protective barrier without adding a shine.  It's a soft, natural look, that is easy to apply.  Easier than you think. Dab a little on a cloth (I use old T-shirts since I have 2,000) and wipe on generously.  Grab a cup of coffee, wait ten minutes, and buff it off with a dry cloth. Done! You can find this wax and other seals in the paint department of your local hardware store. So here we have our table:

See what I mean? It looks like my grandma gave it to my mom, and my mom gave it to me. Delightful. Well I hope you enjoyed my first tutorial for the Divine Minimalist! I had fun writing it.  Keep an eye out for future tutorials in the School of Restoration, as I plan to hit on a variety of techniques from staining to stencils, and taping to... tiling! I had to keep the alliteration going there.  Class dismissed!