School of Restoration: Striped Round Table

Hello again! Hopefully everyone had a great weekend.  We were down in Indio, California, and it was around 92 degrees midday, it was fantastic.  Today, my next tutorial in the "School of Restoration" series on The Divine Minimalist was posted.  Head over to their blog to check it out, or read ahead here. Enjoy!

Today's tutorial will involve mixing paint with wood stain on a tabletop, which is a favorite look of mine.  I love that juxtaposition! We'll be sanding, taping, painting and staining - so get you're gloves on!  For my table, I chose a round table that everyone has or has had in their house at one time, you'll see what I mean in the "before" shot. Take a look at our finished product though:

That's the final result of this tutorial, and I think the pattern made a huge difference in the look of this dime-a-dozen table. Seriously dime a dozen folks, head to your local thrift store because I'm sure you'll find 12 for 10 cents. Just kidding, but these tables really are plentiful. Here's a peak:

Now, I had already taken the legs off - forgive me, I got really excited.  You can of course choose any table you want, but let me just say - the great news about these widely available tables is that they are solid wood, the legs come off, and boy do they ever sand well! So let's get to work.

Materials:

• A Table
• Electric Sander with medium to fine sanding pads.  (or sandpaper and a sanding block if you don't have a sander)
• Sanding Sponge, fine grit
• Masking Tape or Frog Tape
• Masking paper (or any spare paper) 
• Paint Brushes
• Optional: Extra paint gallon cans (free stilts!)
• Plastic sandwich bags (for inbetween coats)
• 2 colors of paint (stripes and legs)
• Wood Stain
• An old T-shirt
• Minwax polycrylic, satin 
• A weekend

To start, let's strip this table down.  My weapon of choice, is the electric sander.  I  highly suggest the investment (check your area to see if you have a used tools shop, you can save a ton o' cash...).  I started with a coarse grit, and the varnish flew right off, I was so impressed.

Here's a halfway sanded shot, see the difference from the varnished to the wood? I just wanted to remove that top layer.  After the course paper, I went over it with a fine grit to get rid of any rough edges and bumps I may have left behind.  Here's the opportunity to remove any stains or marks that the table inherited along the way. Just blend over the area gently and watch it vanish.

Here we are, all finished! I took my fine sand paper and went over the table sides and legs lightly, just to rough them up enough to give the paint something to hold onto.  Since we are painting the sides and legs, I wasn't too worried about completely removing the varnish.

 I like to do the table top last, to avoid having to put a freshly painted tabletop upside down.  So let's flip it at this point. Mask off a rough square around the sides of the underside we are about to paint, as shown below.  

 Even though eyes will rarely see the underside of the table, I figure it's just as easy to go ahead and keep a clean look. Now, paint the sides of the table top base.  Regarding primer, for this look - it's up to you.  I opted out (yet again) because I knew ahead of time I would be distressing the legs.  Also, by not priming, there will not be a white undercoat showing through when we distress.  This is all personal preference, and if you like primer, go for it! It never hurts. If you don't go with distress then primer is a great idea, as you want all the adhesion you can get.

 Yes folks, I busted out the paint sprayer for this one.  You definitely do NOT need to go out of your way and get one of these for this project, but if you own one already - why not get your money's worth out of it? Which is exactly what I did.  A paint brush, or a can of spray paint do the job just fine too.

Paint your legs and your frame layer by layer until you are happy with the finish, letting it dry between coats.  If you're using a brush, tightly wrap it up in a sandwich baggy between coats so you don't have to wash it each time.  If you would like less distress (or if you are going without distressing) then sanding with a fine grade sandpaper between coats will help your top coat stay put.

Set these legs aside in a warm dry place for the next few, and flip that table back over. It's time to tape!

Measure out your stripes.  You could draw the line with a pencil if your table doesn't have lines like this one.  Just be sure to leave the pencil line within the area you will paint, so it gets covered. For this table, I chose a width of 3 planks for my stripes.  I taped outside the 3 planks, then marked with a light X which stripes to paint.  You'd be amazed how easy it is to paint the wrong area! 

I'll be using some Glidden Interior paint I had leftover from another project I did. I love this grey (sp?).  This color is called "Wood Smoke." On another note, I used blue tape because I was pretty sure leakage wouldn't be a problem on this thirsty wood.  Frog tape however, is amazing, for keeping leaks out.  The sides are coated with a chemical that react to the paint, and expand, forming a mini barrier to keep paint from crossing the line. It's great when doing intricate designs.  Since this is a more rustic style, perfection is the least of our concerns.

 Here we go! Paint, paint, and paint again.  See? I don't always cheat and use that gun. I did this one by hand! Also note in the picture above, that my brush is not soaking wet with paint. I like to keep it fairly dry when dealing with taped edges, it's less likely to seep under the tape.

 Done. Let it dry inbetween coats, and since this is the tabletop I'm going to encourage a light sanding between coats. By hand, not by that ferocious electric sander.  Tabletops face a crazy amount of wear and tear, and the more you can do to prolong this coat, the less refinishing you will do down the line. I did 3 thin coats here.  When you're satisfied with yours, carefully pull back the tape to reveal your stripes! If you find the paint is pulling up at all with the tape, stop, and score the edges of the tape with a razorblade or a box cutter.  Easy does it though, we aren't carving this beauty!

Fortunately I did not have that problem, as the paint stuck like a dream to this wood. Have I mentioned how great this type of table is to paint? It's like it was just begging me to do it! I gave the entire table a light sanding by hand, and a little rougher on the edges.  Take a look:

 

Fancy. Get your plastic gloves and wood stain, because up next we give our table some much needed contrast.  I'll be using Minwax Wood Finish, Jacobean.  

Hold the phone - A friend made it clear to me that I should point something out here, I prefer to use Minwax Wood Finish.  Just the finish. Any brand is fine of course, just as long as it's not a, 12 in 1 type thing - stains, seals, delivers, slices, dices..etc. I think that those stains are great for some purposes, but I've found that they are so over-engineered to make the job quicker, that you find yourself rushing to get a smooth look before the whole thing dries.  A nice, oil based wood finish like I have here will give you plenty of time to work with it, and blend any areas that look blotchy. 

 Do this outside though, stuff is stinky!  Hello Jacobean...

I use an old T-shirt, and I chop the sleeves off.  Gloves on, ball up a sleeve and dip a little into the can.  Now start rubbing it on, with the grain, in the bare wood stripes.  Really glop it on.  Let it sit for a few (read your stain instructions), and use the bulk of the Tshirt to buff it off.  If you get it on the painted stripe, just wipe it off fairly quick. For a more distressed look, you can bang up the table a bit before staining, as we learned in the last tutorial.

Once those wood stripes are done, rub some stain on the painted stripes. Then buff off right after.  No need to let this sit on the paint too long, we are just trying to give the table a uniform age and hue.

Don't forge the legs! They are bright as can be.  I ran my sanding sponge over the legs one or two times. Rather than a back and forth motion, I just push hard and drag the sponge down one or two times. I find this to be a little more natural looking, but it's up to you! Here's a tip, when my sanding sponge has lots it's rough edge, and I don't want to run to get another, I use sandpaper wrapped around the sponge to give it a few more go's.  The idea is to have a flexible but firm sanding tool, to grab those curves!

After you've distressed to your liking, take your jacobean T-shirt and run some stain over these legs.  This brings out the distressing, and makes the legs match the hue of the table.  I don't hesitate with the buffing either, this is a wipe on wipe off routine! I find it easiest to put both my hands inside the T-shirt, grab the leg, and just start spining it.  Works like a charm. Here they are, aged a bit:

If you want them older, keep on going.  Do this same technique for the sides of the table frame, on the underside of the table.  It really helped me to put my table top, right side up, on top of a few 1 gallon paint cans. I know, I messed up and didn't take a photo. Forgiveness please! With the table up on the cans, I could keep my table top safe, while staining the sides. It works, and it's free!

Alrighty! Once she's dry, reassemble your table and take a look.  Don't forget to seal! I used Minwax Polycrylic in Satin, because it's nice and natural looking while super strong. Read the directions on your specific stain to know how long to wait before sealing. This is surprisingly important! Now set that table up and snap some photos.

 A little staging never hurt anyone....

You did it! Now show your friends, show us, show the world.  Surprisingly easy to tackle, with some really eye catching results.  Thanks for tuning in for another tutorial in the School of Restoration here on The Divine Minimalist! If you decide to take on this weekend wonder, send us your photos - it's always great to see the work people do.  If you missed our first tutorial you can find it here, and if you are wondering who I am, that's here too.  Class dismissed!

Post a Comment